The Secret of Free Energy

The Secret of Free Energy
Two Circuits/Two Cycles: We are going to use two circuits and two cycles, as shown in Figure
2:
(1) We shall connect a collector to a primary source of potential (to a battery) during the short
time that current does not yet flow, but potential does. (In other words, during the relaxation time
of the collector, we allow the VPF to flow onto the NNTE electrons of the collector and
potentialize (activate) them, but do not yet allow the electrons themselves to flow as current, but
only to move transversely in the wiring and collector.) This is cycle one of a 2-cycle process:
This is collection of a specific amount of current-free potential gradient -- power-free energy --
off the potential-source (the battery) onto a collector. During the collection cycle/time, current
does not and must not flow (we are discussing the ideal case). We are freely "charging up" the
collector as a secondary battery/source.
(2) At the end of the collection (potentialization/activation) time/cycle in circuit one, the
potentialized collector (the charged secondary source) is sharply switched away from its
connection to the primary potential source (the battery), and at the same time it is instantly
switched into a separate closed circuit with the load. This is important: In cycle two, the
potentialized collector (with its finite amount of excess trapped EM energy) and the load are
connected in a completely separate circuit , and one that is closed, with no connection at all to
the original source of potential (in this case, to the battery). Specifically, this "load and
potentialized collector" circuit is completely separate from the primary source; during cycle two
the primary source (the battery) is not connected to anything.
In other words, all we've taken from the primary source (the battery) is cur ent-free, force-fieldfree
potential gradient . So to speak, we've taken a "chunk of potential gradient" from the source,
nothing else. You simply multiply the potential gradient's local energy density (the so-called
"voltage", which is really excess joules per coulomb) by the number of coulombs of charge that
is "activated" (that "collects" this voltage or excess joules/coulomb) in the collector. Specifically,
we have not taken any power from the battery itself, and so we have not done any internal work
inside the battery upon its internal resistance, by a "closed circuit electron flow" back into the
battery. We have not permitted such a flow.
r
Instead, we are using the activated collector as a temporary, secondary battery. We will utilize
this secondary battery in a conventional manner to power the load, which will also kill the
secondary battery (dissipate its trapped EM energy). But that will not affect the primary source.
The primary source is never used to directly power the load. It is only used as an infinite source
of potential gradient (i.e., as an infinite source of energy density).